Weight: 0.7 lbs
With these tiny binaural stereo microphones mounted in cool croakie-type eyeglass holders, you'll "Stealth" with Style. They come inside a stretchy black fabric that will slip onto most standard-thickness eyeglass frames.
The MM-BSM-4 is made by hand with high quality products to ensure long life and excellent recordings! These omni-directional microphones are smaller than the eraser head of a pencil. Each microphone element is mounted into its own durable brass capsule (approx. 1/4" in diameter x 1/2" long). Six feet of high-quality shielded microphone cable exit the rear of each capsule and join into a gold-plated 1/8" (3.5 mm) standard stereo miniplug.
These microphones have a crisp, natural sound, providing deep bass, smooth mids and clean highs, with a frequency response of +/-2dB.
They can be easily plugged into any minidisc, DAT or analog recorder that supplies a bias voltage of between 1.5 to 10 volts D.C. (also known as plug-in-power) at the microphone input jack.Note:
If your recorder does not provide a bias voltage, you can use our Microphone Madness-MM-Stereo Pre-Amp
Or, if you want to feed your recorder's line inputs to avoid overloading the onboard mic pre-amplifier, you can use one of our Microphone Madness Battery Modules
Frequency response: 20-20,000 Hz
Signal to noise ratio: 58dB, 1khz at 1pa
Open circuit sensitivity : -42dB (5.6 mv) re 1v at 1pa
Dynamic range: 70dB, 1kHz
Maximum Input Sound Level: 105dB SPL, 1kHz at 1%Features:
Flat frequency response
Comes with premium windscreens
Requires a bias voltage of 1.5 to 10 volts D.C. (also known as plug-in-power) or one of our battery modules.
Includes Manufacturer's Life-Time Warranty at no extra charge!NOTE: Please be sure to get permission to record where applicable.
Eyeglasses are not included.